Arc

  Comanda  Arc (A) desenează arcuri de cerc 


1. Arc definit prin trei puncte

  • Command: _ arc Enter
  • Specify start point of arc or [Center]:  P1
  • Specify second point of arc or [Center/End]: P2
  • Specify end point of arc:  P3

 

2. Arc definit prin centru şi capete

  • Command: _ arc Enter
  • Specify start point of arc or [Center]:  P4
  • Specify second point of arc or [Center/End]:  Enter
  • Specify center point of arc:  P5
  • Specify end point of arc or [Angle/chord Length]:  P6


 

3. Arc definit prin centru punct inițial şi unghi la centru

  • Command: _ arc  Enter
  • Specify start point of arc or [Center]: P7
  • Specify second point of arc or [Center/End]: Enter
  • Specify center point of arc:  P8
  • Specify end point of arc or [Angle/chord Length]: A Enter
  • Specify included angle: 60 Enter


 

4. Arc definit prin centru punct inițial și lungimea corzii

  • Command: _ arc Enter
  • Specify start point of arc or [Center]:  P9
  • Specify second point of arc or [Center/End]:   Enter
  • Specify center point of arc:  P10
  • Specify end point of arc or [Angle/Chord Length]:  L Enter
  • Specify length of chord: 22 Enter



 

5. Arc definit prin punct iniţial, punct final şi unghi la centru

  • Command: _ arc Enter
  • Specify start point of arc or [Center]:  P11
  • Specify second point of arc or [Center/End]: Enter
  • Specify end point of arc:  P12
  • Specify center point of arc or [Angle/Direction/Radius]: Enter
  • Specify included angle: 60 Enter


6. Arc definit prin punct iniţial, punct final  şi direcţie

  • Command: _ arc Enter
  • Specify start point of arc or [Center]:  P13
  • Specify second point of arc or [Center/End]: E Enter
  • Specify end point of arc:   P14
  • Specify center point of arc or [Angle/Direction/Radius]: D  Enter
  • Specify tangent direction for the start point of arc:  P15


7. Definit prin punct iniţial, punct final  şi rază

  • Command: _ arc Enter
  • Specify start point of arc or [Center]:  P16
  • Specify second point of arc or [Center/End]: E Enter
  • Specify end point of arc:   P17
  • Specify center point of arc or [Angle/Direction/Radius]: R Enter
  • Specify radius of arc: 15 Enter





Imprimare