1. Drepte construite prin 2 puncte
- Command:
_xline Enter
- Specify a point or [Hor/Ver/Ang/Bisect/Offset] P1
- Specify through point: P2
| 
|
2. Drepte orizontale sau verticale
- Command: _xline Enter
- Specify
a point or [Hor/Ver/Ang/Bisect/Offset] : H Enter
- Specify through
point: P3
| 
|
3. Drepte înclinate la un unghi dat
- Command:
_xline Enter
- Specify a point or
[Hor/Ver/Ang/Bisect/Offset] : A Enter
- Enter angle of xline (0) or [Reference]: 15 Enter
- Specify through point : P4
| 
|
4. Construirea bisectoarelor
- Command: _xline Enter
- Specify a point or
[Hor/Ver/Ang/Bisect/Offset] : B Enter
- Specify angle
vertex point: P5
- Specify
angle start point: P6
- Specify angle end point: P7
| 
|
5. Drepte paralele la un obiect
- Command: _xline Enter
- Specify a point or
[Hor/Ver/Ang/Bisect/Offset] : O Enter
- Specify offset distance or [Through]
<5.0000>: 7 Enter
- Select a line object: S8
- Specify side
to offset: P9
| 
|
Comanda Construction Line (xL) desenează
linii drepte infinite: prin 2puncte, orizontale, verticale, sub un unghi,
bisectoare, sau paralele la un obiect.