Menul site-ului

Rectangle

 Rectangle (Rec) desenează dreptunghiuri cu laturi paralele axelor de coordonate prin indicarea capetelor diagonalei

1. Prin 2 puncte ale diagonalei

  •   Command: _rectang Enter
  •   Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]: P1
  •   Specify other corner point or [Area/Dimensions/Rotation]: P2



 

2. Cu teşitură

  • Command: _rectang Enter
  • Specify first corner point or [Chamfer/…]: C Enter
  • Specify first chamfer distance for rectangles <0.0000>: 5 Enter
  • Specify second chamfer distance for rectangles <5.0000>: 2 Enter
  • Specify first corner point or [Chamfer/…] :  P3
  • Specify other corner point or [Area/..]:  P4



 

3. Racordat

  • Command: RECTANG Enter
  • Specify first corner point or […/Fillet/…]: F Enter
  • Specify fillet radius for rectangles <0.0000>: 5 Enter
  • Specify first corner point or [Chamfer/…]:  P5
  • Specify other corner point or [Area/…]:  P6


 

4. Cu grosime

  • Command: RECTANG Enter
  • Specify first corner point or […/Width]: W Enter
  • Specify line width for rectangles <0.0000>: 3 Enter
  • Specify first corner point or [Chamfer/…]:  P7
  • Specify other corner point or [Area/…]:  P8



 

5. Cu suprafaţa şi una dintre laturi stabilite

  • Command: RECTANG Enter
  • Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:  P9
  • Specify other corner point or [Area/Dimensions/Rotation]: A Enter
  • Enter area of rectangle in current units <100.0000>: 200 Enter
  • Calculate rectangle dimensions based on [Length/Width] <Length>: L Enter
  • Enter rectangle length <20.0000>: 20 Enter

6. Cu dimensiunile laturilor stabilite

  • Command  : RECTANG Enter
  • Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:P10
  • Specify other corner point or [Area/Dimensions/Rotation]: D Enter
  • Specify length for rectangles <22.0000>: 20 Enter
  • Specify width for rectangles <9.0909>: 15 Enter
  • Specify other corner point or [Area/Dimensions/Rotation]:  P11

7. Rotit

  • Command: RECTANG Enter
  • Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:   P12
  • Specify other corner point or [Area/Dimensions/Rotation]: R (Enter)
  • Specify rotation angle or [Pick points] <0>: 30 Enter
  • Specify other corner point or [Area/…]:  P13




Imprimare